Chery
Cultivate independent car parts to support brand growth
“Chery Automobile is taking the new brand attitude of ‘new standard, new power and new Chery’ to match the level of joint venture brands and strengthen Chery’s brand image and position in the market.” Huang Huaqiong, assistant general manager of Chery Automobile, said in an interview. He indicated that car parts and components strategy and supply chain strategy are gradually clear, and effectively support the realization of the company’s goal.
Improving brand value is the first task of all current vehicle companies. In addition to using global resources and strengthening cooperation with high-quality auto parts suppliers and OEMs, vehicle companies will also not give up cultivating the market competitiveness of independent parts companies. Now, Chery has realized the true meaning of sustainable development step by step, and its parts procurement strategy has gradually become clear. Li Lizhong, executive deputy general manager of Chery Automobile, who is in charge of parts strategy, said: “We have established Chery Technology and other related parts companies, and formed a strategic layout of parts and components such as car seat systems, electronic control systems, and chassis systems. With the development of Chery, these parts and components companies have also grown up, and have greatly improved in terms of development capabilities, testing capabilities, manufacturing capabilities, and quality standards, and some companies have exceeded 16 million usd in revenue. Chinese car parts companies have become the core suppliers of Chery and the dominant suppliers of many joint venture vehicle companies.
Turn to Cultivate Independent Supplier Competitiveness
“Chery’s parts strategy is the integration of strategies for parts technology, quality, cost and supplier. It is not simply to go after cost advantages, but the best combination of advantages after comprehensive balance of QCDD, especially quality performance. Chery has been focusing on Brand enhancement, the key to leverage brand is to improve the quality level. In recent years, the quality of Chery’s parts and components has improved significantly.” Li Lizhong said that combined with the parts strategy and its own current situation, Chery is competitive for core/key systems, modules, and parts. At the same time, it conducts strategic joint ventures and cooperation with major global parts suppliers, makes full use of mature, advanced, and innovative technologies and platforms. standardization, generalization, and modularization, strengthens joint ventures and cooperation in core technology parts, and comprehensively enhances capabilities in all aspects. These aspects become Chery’s core competitiveness, and also encourages some joint ventures to actively explore external markets and promote overall capacity improvement.
Li Lizhong said that based on global procurement, Chery’s parts categories are divided into strategic categories, bottleneck categories, leverage categories and general categories. He introduced that Chery’s parts strategy is based on category division. For example, the strategic category procurement strategy is to share in-depth technology and resources, promote the development of core technologies, form core competitiveness and ensure supply; leveraged categories are to take advantage of the competitive environment , and achieve economies of scale by integrating supply chain resources. He said: “At present, we have established a core supplier cultivation mechanism to support the implementation of the company’s strategy and product strategy. In addition, in order to improve supplier capabilities, Chery has also established a professional cross-departmental team to go deep into the supplier site, from QCDDM ( The five dimensions of quality, cost, delivery, development, management) systematically improve supplier capabilities.”
At present, suppliers are more and more involved in the whole process of development, production, sales and service of OEMs. Organic integration and integration of supplychain resources and capabilities have become the key strength of OEMs. The procurement management module has become the value creation department of the operation and development of the vehicle enterprise; from passive transaction to active strategy type, from procurement execution to full supplychain management, it has become an important link between the supply chain and the internal value chain. Li Lizhong said that with the strategic transformation of Chery, the procurement management has also undergone continuous and in-depth transformation, and gradually implemented the process from procurement execution to procurement management, from supplier management to supply chain management, from domestic layout to global procurement, from focusing on costs to The quality-centered supply chain is cost-leading, and it has transformed from business negotiation to focusing on supply chain capacity establishment.
The strength of spare parts sector cannot be underestimate
Chery Automobile has its own parts company called Chery Technology, which will be an important platform for the planning and development of Chery’s parts industry in the future.
Li Lizhong said: “Chery Technology, which was established in 2011, is responsible for the investment and management of Chery’s auto parts industry chain, and participates in the design, development, manufacturing, and after-sales service of auto parts.” He told that there are currently 27 components companies under Chery Technology. Among them, 4 are self owned, 7 are holding shares, and 16 are share-holding companies. They have gradually formed a system covering automotive chassis, electronic appliances, body/safety, powertrain and other component systems and automotive equipment design and manufacturing. Through nearly 15 years of development, it has become a component group with an annual sales volume of more than 1 billion usd. It has established joint ventures with well-known companies such as Magna, Bosch, Halla, and Fuzhuo. It has two national-level laboratories and 8 provincial-level laboratories. The technology center has a total of more than 1,000 patents and undertakes 21 national key technology projects.
Li Lizhong introduced that at present time, most of Chery Technology’s component companies not only meet Chery’s internal supply needs, but also actively explore external markets. Based on high-tech content, high added value, and high-quality brands for the product layout and positioning of mainstream models Cooperation with large and well-known OEMs domestic and abroad. Chery parts companies such as Bethel, Tonghe, Atech, Jenori, Bonaire, etc. have grown together with Chery for many years and continuously expanded the external market, and become parts companies with advantages in technology, brand and talent pool.
Great Wall Motors
“Two threads” component routes are becoming clear
It is not an exaggeration to define Great Wall Motor’s parts strategy as “two threads”. Although we communicated with a number of Great Wall Motor’s internal R&D personnel, no one could give an accurate description of Great Wall Motor’s parts strategy. However, Great Wall Motor’s parts strategy is indeed progressing steadily.
Focusing on the business policy of “focusing on quality, reforming R&D, and deepening operations”, Great Wall Motors has established a business model that is based on integrating global high-quality parts resources and surpassing international benchmarks to build technology development and product innovation capabilities. This simple policy is actually based on the experience over the past two decades of Great Wall Motors. On the one hand, Great Wall Motors strengthens its vertical integration capabilities, improves its own production capabilities for key components, and enhances its cost competitiveness; on the other hand, it develops strategic partnerships with international core components suppliers, masters core technologies, and ensures the quality of vehicle products , follows international trend of configuration requirements.
Cooperation between international auto parts and components enterprises under three high-ends
After more than 7 months of efforts by Great Wall Motors and German company ZF Group, the problem of the H8 rear axle main reducer was solved. Facing the ups and downs of Great Wall H8, Wei Jianjun, chairman of Great Wall Motors, said: “Independent brands must challenge high-end, so as to have the opportunity to expand overseas.” In fact, since the first Great Wall pickup truck was exported overseas in 1998, Wei Jianjun has been planning It is the internationalization strategy of Great Wall Motors. An engineer of Great Wall Motors in charge of new product design and development said: “In recent years, we have had more and more opportunities to communicate with personnel from international parts companies, covering all aspects of new car development.”
On April 8, 2011, at the Great Wall Motors International Strategy Seminar held in Beijing, Great Wall Motors was based on its international R&D strategy and characterized by its “three high-ends” strategy (high technology, high performance, and high quality). The international strategic development mind set has been affirmed by industry experts. The upgrade from general product supply to international strategic cooperation and simultaneous research and development of new products has become a major feature of the cooperation between Great Wall Motors and international parts companies. In the following two years, Great Wall Motor has been in full swing, successively working with more than ten companies including Ricardo, Mahler, Autoliv, Posco, Brose, Delphi, Trina, Total, Hella, Schaeffler, 3M and Dassault. Internationally renowned parts companies have signed strategic cooperation agreements, involving powertrain, chassis control, body design, electrical systems, and interior and exterior trims.
In fact, the successful listing of Great Wall Motors in Hong Kong in 2003 was the key to boost its international cooperation, and the additional issuance of H shares in 2007 once again enhanced Great Wall Motors’ position in the international capital market and increased Great Wall Motors’ bargaining power in attracting international investment. “From a technical point of view, after several years of international strategic cooperation, Great Wall Motor has been able to assemble almost all of the most popular new configurations for its new models.” An industry expert gave Great Wall Motor such an evaluation. According to the 2014 annual report of Great Wall Motors, based on its future development strategy, Great Wall Motors will launch more SUV and Off-road models including large, medium and small; product matrix of different specifications and styles such as gasoline and diesel.
Can Great Wall Motor’s auto parts industry be independent?
On June 18, 2000, Great Wall Internal Combustion Engine Manufacturing Co., Ltd. was established, and Great Wall Motors became the earliest enterprise with core power among its own brand enterprises. Over the past 20 years, Great Wall Motors has never stopped the research and development of core components such as engines and transmissions, and has been continuously strengthening its independent research and development capabilities. The H8 incident highlighted the deficiencies of Great Wall Motors in the R&D system, and thus caused a change in the R&D system of Great Wall Motors. The purpose of the change is to strengthen the pre-planning of products, pay close attention to the source of design, and improve the quality of product design. In 2014, Great Wall Motor’s R&D expenditure reached 2.571 billion yuan, accounting for 4.11% of operating income, and R&D expenditure continued to increase. This year, Great Wall Motor’s new technology center will be put into use, including five areas: R&D center, trial production center, test center, modeling center and data center, to further enhance R&D strength.
Combined with the increasing R&D strength, Great Wall Motor’s self-production capacity is improving, and it has more than 30 holding subsidiaries. Great Wall Motor’s H-share listing in 2003 and refinancing funds in 2007 were mainly used to build a new plant, increase high-tech facilities for complete vehicles and engines, and expand existing parts production plants, including front and rear axles, frames, interior parts and accessories. In 2011, Great Wall Motor’s A-share listing raised half a billion usd, which was used to invest in a total of 7 production expansion projects for auto parts such as engines, transmissions, axles and brakes, interior and exterior trims and lights. These projects are built around Great Wall Motor’s Tianjin and Baoding production plant. Almost all projects were completed by the end of 2014.
During the interview, some experts pointed out that with the improvement of the parts business, Great Wall Motors may spin off the parts company and establish an independent parts group, so as to enhance the business flexibility of the company and bring in revenue from orders outside the group. In fact, in 2001, when Great Wall Internal Combustion Engine Co., Ltd. developed the 491QE multi-point EFI engine, it began to supply many domestic OEMs. Today, Great Wall Motor’s parts business includes self-manufactured engines, transmissions, front and rear axles, air-conditioning equipment, steering ball pins and tie rod assemblies, as well as other components for the production of complete vehicles.
Geely
Subtraction for Geely auto parts sector
Geely Auto’s spare parts development strategy is obviously taking a new path.
At a time when many OEMs continue to increase the strength of their own parts companies through joint ventures and cooperation, Geely has successively sold traditional advantageous parts companies including DSI. Although Geely is also acquiring connected car and new energy vehicle manufacturing and parts companies, there are indications that in the field of traditional parts and components, Geely is not hesitating to do the “reduction” method.
The sale of traditional parts companies is to optimize capital efficiency, focus on building vehicle quality and enhance brand image. In the past 10 years, Geely Automobile has invested a lot of money to revive Volvo Cars. With the support of Volvo’s superior technology module platform, Geely Automobile has continuously abandoned the traditional parts industry and gradually shifted its focus to the technical reserves of future cars such as intelligence and interconnection.
Reduction for auto parts business
Not long ago, Li Shufu, chairman of Geely Group, released the future development strategy of Geely Auto.
Li Shufu pointed out that facing the future, Geely Group has a unified deployment, and has clearly planned a platform-based and generalized R&D strategy with KC and FE platforms and a CMA basic module architecture as the pillars, aiming at the target market segment, providing design confidence A dynamic, fun-to-drive, technologically reliable and caring product portfolio.
At the same time, Geely will take green energy technologies, especially gasoline-electric hybrid and plug-in hybrid technologies, as an important strategic fulcrum for the group’s future development. In addition, Geely will continue to enforce the technical cooperation with Volvo, expand the synergies in the group’s R&D, procurement, manufacturing and other fields, facilitate Geely Auto rapid and sustainable development, and enhance Geely’s product quality and brand image.
Obviously, Geely hopes that in the future, the company can develop a new path for the development of Chinese brands by integrating international resources. This also determines that it must abandon the big and comprehensive development ideas in the past, strip off the burden. Previously, Geely Group sold its 5-speed manual transmission and 6-speed manual transmission assets to Wan Liyang. Also, Geely completed the sale of three companies, DSI, Hunan Jisheng and Shandong Transmission. In 2013, Geely Group sold all the shares of Shanghai Maple Automobile Mould Manufacturing Co., Ltd., and sold 51% of the indirect equity of Shanghai Yinglun Dihua to Maple Motor, and at the same time divested 50% of the indirect equity of Qufu Kailun Automobile.Such market behavior is to serve the overall development strategy of this enterprise.
Technology focus shifting to smart cars
Geely Auto acquired a 100% stake in Volvo for $1.8 billion. After that, Geely continued to invest in research and development expenses in the field of smart cars, and developed the XC90 module with a leading level. Li Shufu said that Geely can share various models and technologies developed on this infrastructure module in the future, and Geely Auto will also be a highly intelligent vehicle that is modular, lightweight and intelligent in the future. “Volvo started working on connected cars 15 years ago; completed large-scale, long-distance trials of autonomous driving seven years ago; the XC90 has achieved highly automated driving and has been put into mass production.” Once Geely has mastered the core technology in smart cars, it will also promote the development of China’s auto industry and foster the coordinated development of smart car parts.
Geely Group attaches great importance to the reserves of technologies and components in the field of connected cars and green energy vehicles. Geely is now conducting preliminary consultations with a number of international leading companies on the development of core technologies related to new energy vehicles, and strives to develop various types of green energy vehicle products into the market. Geely Group will also use Volvo Cars’ leadership in hybrid electric vehicles to gradually realize the transition from hybrid to pure electric technology.
Focusing on global procurement and optimize supplier management system
In the past, Geely Group did have some self-owned, joint-venture and share-holding parts companies, but now its spare parts companies are gradually decreasing. At present, Geely does not have a particularly clear auto parts strategy, but it is implementing a global parts procurement strategy, optimizing and integrating global resources.
Yang Xueliang said that in order to ensure product quality, Geely Automobile has taken various measures including optimizing the supplier management system, improving the level of manufacturing processes, and resolutely eliminating suppliers that do not meet the needs of quality improvement, so as to achieve the purpose of improving product quality. This is reflected in the Borui models. A large number of world-leading suppliers such as Harman, Valeo, and Continental Motors are providing spare parts for the Borui models.
BYD Automobile
The change and unchange in vertical integration
BYD’s parts business is in a state of change and unchange in vertical integration. What remains unchanged is that BYD still insists on vertical integration; what has changed is that the way of vertical integration has changed a lot.
In July 2002, BYD wholly acquired Jichi Mould Factory; in 2003, BYD became the world’s second largest manufacturer of rechargeable batteries; in the same year, Wang Chuanfu, who wanted to build electric vehicles, acquired Qinchuan Automobile 77% of the shares for 41 million usd. With the help of capital strength and technology accumulation in the IT and battery industries, BYD promotes “vertical integration”, and its F3 launched in 2005 achieved a huge advantage as soon as it was launched. BYD quickly has a stable market. “BYD chose vertical integration and achieved rapid success, but this also paved the way for the subsequent market downturn.” an industry expert indicated.
In fact, Wang Chuanfu, chairman of BYD’s board of directors, tried to cooperate with excellent parts suppliers at the beginning of the integration of the auto industry chain, but this new brand is not very attractive to most spare parts companies, and the matching price is high. Therefore, BYD replicates its vertical integration experience in the battery field to the automotive industry. In addition to glass, tires and steel plates, BYD has made achievements in the manufacture of various auto parts, especially the self-developed 1.5T turbocharged engine and 6-speed dual-clutch transmission have been launched in batches. It is reported that more than half of the parts and components of BYD Auto are still self-produced in order to maximize the profit of the whole vehicle.
Compared with other automobile companies, BYD’s goals in the auto parts business are more clear. For example, the lithium-ion battery expansion project with an investment of 1 billion usd can realize the large-scale production of lithium-ion batteries and the vertical integration of the industrial chain, reducing production costs. BYD’s investment in the new energy vehicle R&D project is to accelerate the overall layout of the upstream and downstream market segments of the new energy vehicle industry chain, and to focus on the “7+4” strategy to cover 7 major target markets for new energy vehicles (private cars, Buses, taxis, sanitation vehicles, intercity passenger vehicles, logistics light trucks, construction vehicles) and 4 special vehicle markets (special vehicles for warehousing, airports, mines, and ports) to achieve comprehensive coverage of transportation tools . In fact, in the process of cooperating with Daimler to build Denza, BYD has shared a lot of experience in parts manufacturing, integration and debugging, and expanded its ability to develop and manufacture new models of the whole vehicle, which also makes BYD more confident to face Broader market segments to promote mature electric vehicle technology.
The vertically integrated business model has become the core strength of BYD’s competitive advantage. By controlling the cost of upstream raw materials, BYD minimizes production costs and improves efficiency, creating a low-cost operation capability. Industry experts believe that BYD’s three major industries of IT, new energy, and automobiles can operate in cross-operation, and its R&D strength in the field of new energy technology is unmatched by other independent brands, which gives BYD more advantages in market competition.
Thanks for your blog, nice to read. Do not stop.